corrugated plate

英 [ˈkɒrəɡeɪtɪd pleɪt] 美 [ˈkɔːrəɡeɪtɪd pleɪt]

网络  波纹板

机械



双语例句

  1. The Perturbation Method of the Large Deflection Problem of Circular Corrugated Plate with Sine-shape Shallow Waves
    浅正弦波纹圆板大挠度问题的摄动解法
  2. Direct Growth Behavior of Spherical Grains in Vibration Process of Sloping Corrugated Plate
    波浪型倾斜板振动过程中晶粒直接球状长大行为
  3. The behavior of droplet of steam-water separator with corrugated plate is simulated by founding a two-phase and three-flow-field numerical model considering to the reentrainment.
    通过建立一个考虑二次携带现象的两相三流场数学模型,对波形板的液滴行为进行了数值模拟。
  4. It could be concluded that the two-hook corrugated plate outperforms the one-hook when reentrainment is existed.
    结果表明,存在二次携带情况时,双钩波形板分离效率最优。
  5. Research of corrugated plate heat exchanger used on the high temperature industrial furnace
    工业炉用波纹板式换热器的试验研究
  6. Research of Rolling Process for Corrugated Plate in Hot Strip Mill
    热连轧机花纹板轧制工艺的研究
  7. Plate air preheater with corrugated plate as heat transferring elements, has solved problems above, which has been applied in petrochemical and chemical fertilizer unit.
    采用以波纹板片作为传热元件的新型板式空气预热器,克服了上述问题并在石化、化肥等行业上得到了应用。
  8. Correlations of condensation heat transfer and pressure drop inside circular tubes and corrugated plate channels
    管内与波纹板通道内冷凝传热和压降关联式
  9. The structure and performance characteristics of shell heat exchanger with corrugated plate are introduced.
    介绍了波面板壳式换热器的结构和性能特点。
  10. Influence of structural parameters of corrugated plate packing on its performances
    孔板波纹填料的结构参数对其性能的影响
  11. Eigenvalue Buckling Analysis of Channel Corrugated Plate Assemblies under Axial Compression
    波纹槽型截面板组轴心受压下的特征值屈曲分析
  12. Usually, the corrugated plate heat exchanger is used on the low temperature equipment.
    波纹板式换热器通常用于低温设备上。
  13. To inspect the brazing seam of corrugated plate sandwich structure, X ray photograph was taken.
    为检测波纹板夹层结构高温钎焊焊缝质量,对其进行了X射线照相检查。
  14. A mathematical model was established for condensation on surfaces of vertical corrugated plates based on the mechanism of heat transfer enhancement to thin down the liquid film due to surface tension effect between corrugated plate surfaces and liquid films.
    基于波纹板表面与液膜之间的表面张力作用能减薄液膜厚度而强化传热的机理,建立了竖直波纹板表面的凝结过程的数学模型。
  15. Intelligent control for cutting plastic corrugated plate
    塑料瓦楞板剪切的智能控制
  16. A liquid distribution model based on packing structure was developed for metallic corrugated plate packings.
    根据金属板波填料的结构,建立其液流分布模型。
  17. The influence of structural parameters of plastics porous corrugated plate packing on its hydrodynamic performance was investigated in a Φ 300 mm packing tower with air-H 2O system.
    在内径为300mm的填料塔中,以空气-水为物系,研究了塑料孔板波纹填料的结构参数对其流体力学性能的影响。
  18. Study on absorption property for rotating packed bed with plastic corrugated plate packing
    塑料孔板旋转填料床吸收性能研究
  19. A new type corrugated plate shell exchanger developed by the author is introduced.
    介绍作者研制的一种新型波纹板壳式换热器。
  20. By means of modified iteration method, this paper gives approximate solution of the large deflection equations of circular corrugated plate with sine-shaped shallow waves having a central platform under uniform lateral load.
    本文用修正迭代法求解了波纹圆板壳体大挠度方程,得到了具中心平台的浅正弦波纹圆板在均布载荷下的弹性特征;
  21. The influence of structural parameters of corrugated plate packing on its performance of axial mixing in liquid phase and hydrodynamic and mass transfer was investigated in a Φ 300? mm ID packing tower.
    在内径Φ300mm的填料塔中研究了孔板波纹填料的结构参数对液相轴向混合特性、流体力学和传质性能的影响。
  22. Comparing with metal packing, the plastic corrugated plate packing has the advantages of gas resistance less, cost lower, accumulation density smaller, and manufacture simple etc.
    塑料孔板填料与金属填料相比,具有气阻小、造价低、堆密度小和加工简便等优点。
  23. Research on heat transfer enhancement of gas-gas corrugated plate heat exchanger
    气-气波纹板换热器强化传热研究
  24. Influence of Structural parameters of Corrugated Plate Packing on Performance of Axial Mixing in Liquid Phase
    孔板波纹填料结构参数对液相轴向混合的影响
  25. The plate type water heater using corrugated plate heat transfer enhancement technique possesses features of high efficient, compact, material saving and low cost.
    板式热水器采用波纹板强化传热技术,具有高效、紧凑、节省材料和低成本等优点。
  26. The Process Producing Corrugated Plate for Granary with Vertical Hydraulic Press
    喉垂直部分切除术;立式水压机生产粮仓波纹板的工艺研究
  27. Development of a New Type Corrugated Plate Shell Heat Exchanger
    新型波纹板壳式换热器的研制
  28. The results obtained provide a theoretical basis for the development and application of strengthening the heat transfer of granular media flowing in the corrugated plate heat exchanger.
    这些研究结果为粉粒体波面板换热器强化传热的研究与开发提供了理论基础。
  29. Development of auto-welding machine for corrugated plate of container
    集装箱波纹板自动拼焊机的研制
  30. In this research, through the test in geometric parameter and resistance performance, and comparison between random and other stacked packing, PVC screw thread oblique corrugated plate have more advantage.
    通过对PVC螺纹斜波纹板填料几何参数和阻力性能方面的测试,得出PVC螺纹斜波纹板填料较散堆填料和其他类型规整填料更具优势。